Services
Use our diverse customization options
Everything begins with individual advice. We’ll be pleased to support you with your project and find solutions for every requirement. Customer-specific solutions are our speciality.
Test how our product works with your components and assemblies. We’ll be pleased to send you a sample to complete your evaluation.
Would you like to have all your components supplied already assembled? No problem. Our assembly team will be pleased to perform all assembly work on your behalf.
If you need a plastic enclosure in a special material like polycarbonate or ASA (Luran S) – no problem. We’ll be pleased to produce a limited series for you, too.
Our specialists will be pleased to discuss your customised enclosure design for enclosures and enclosure parts produced in large volumes. We can also realise the most unusual project designs quickly and according to your requirements.
Our standard tools can accommodate interchangeable inserts in the most frequently used interfaces – allowing modifications to be made. This means that special requests can be realised quickly, reliably and affordably.
Custom accessories that we can produce and assemble for you also include display foils.
We’ll be glad to design customised membrane keypads and attach them in accordance with your requirements.
We will visualise your ideas in the planning and development stage, making them tangible. As initial samples for tests or the basis for developing applications.
Accessories
Our portfolio includes an extensive range of accessories including front panels, mounting plates, support rails and terminal blocks, as well as cable glands, blanking plugs and much more.
Document download
On this page we provide certificates and data sheets for our products for you to download.
Regulations
We take legal regulations and the preservation of our environment very seriously.
As you can already read under the heading of sustainability, the protection of our environment and the sustainable use of resources are very important to us. For this reason, we of course pay strict attention to compliance with statutory regulations. Find out more about our statement on conflict minerals, REACH and ROHS at ROLEC.
STATEMENT IN REGARDS TO CONFLICT MINERALS
On July 21, 2010, US President Barack Obama signed the Dodd-Frank Act, which in addition to the regulation of financial markets also obligated companies to not use raw materials from conflict regions (§ 1502).
This includes the publication and reporting obligations for “conflict minerals”: Companies listed in the US stock exchanges must publish the usage of certain raw materials that come from the Democratic Republic of Congo or other neighboring states (Angola, Burundi, Republic of Congo, Rwanda, Zambia, Sudan, Tanzania, Uganda, Central-African Republic).
Conflict materials in regards to this law include tin, tantalum, tungsten and gold.
We are aware that the mining of these “conflict minerals” in different countries, particularly in Central Africa, may lead to profits that are used to finance armed conflicts that may result in unacceptable human rights violations.
We have informed our suppliers that we cannot accept products and raw materials that contain gold, tantalum, tin or tungsten from conflict regions. Our suppliers were asked to inform us immediately if they use such “conflict minerals” in their products. All previous confirmations in our supply chain have not shown any deviations from the order. Thus, we assume that ROLEC products do not contain the named minerals from the aforementioned region.
Furthermore, the compliance with this order is a component of our delivery conditions and we have asked our suppliers to guarantee that no “conflict minerals” are used in their supply chain.
REACH
Registration – Evaluation – Authorisation of Chemicals (REACH)
Safe implementation of materials throughout the entire value creation chain
The concept of sustainability is anchored in our company’s philosophy: ROLEC thinks, acts and feels with strategy, passion and environmental awareness! We, too, follow the obligation:
In general, chemicals should be produced and used such that negative effects on humans and the environment remain reduced to an absolute minimum.
The European Union implemented this in legislation effective 1 June 2007 with the “REACH” Regulation. It is based on the principal of self-responsibility in all companies who import, manufacture and process chemicals. They are responsible for guaranteeing that their materials and processes are handled in a safe manner. They are obligated to have the materials implemented registered, to collect the requisite data and to pass them along throughout the value creation chain.
Suppliers of articles will fundamentally only have a disclosure obligation if more than 0.1% (w/w) of articles* exported from outside the EU consists of substances on the candidate list published by the ECHA (European Chemicals Agency, Helsinki)(Art. 33).
(*The term articles in this context means articles whose form, surface and design determines function to a greater degree than does the chemical composition.)
REACH and relevance for ROLEC
ROLEC Gehäuse-Systeme GmbH is a “downstream user” and “supplier of articles” under the REACh- Regulation; therefore, there is no registration obligation. Our products do not release any substances. Thus, Art. 7 (1) of the Regulation is not subject to application for us. However, we certainly do meet our disclosure obligations as a “supplier of articles” (Art. 33 REACH Regulation).
The materials and processes (lacquer, powder coatings, adhesives, coolants and lubricants we produce) are exclusively procured in the EU. Customers procuring these materials and looking to use them for applications such as repairs or their own production will receive the respective safety data sheets from our suppliers in compliance with REACH.
We do, of course, have all products procured outside the EU (components and components groups) tested for the potential presence of substances on the candidate list. Should they be present in a critical volume (> 0.1% (w/w)), we notify all parties involved immediately.
Upstream suppliers and REACH
The REACH Regulation means: “No data – no market!”
For Rolec, this means: Our suppliers must be aware that we can only purchase products from them when they have their products tested in line with REACH and can supply the requisite data.
Of course, we also expect our suppliers working outside the EU’s borders – be they importers or manufacturers – to have acted on time to meet these requirements.
All suppliers domiciled outside the EU have been required to have the material compositions and preparations affecting our products tested for substances in the candidate list and to replace them as necessary. The latter has not been necessary thus far; none of our products has required modification of its composition due to REACH. REACH represents a “living system” and is constantly being expanded. We, too, continue to ensure the harmlessness of the materials we use. Thus, REACH is an integral part to all of our processes.
ROHS
Directive 2011 / 65 / EU “Reduction of hazardous substances” (RoHS)
Safety and transparency with the selected material
ROLEC Gehäuse-Systeme GmbH follows all of the standard rules and legal requirements in selecting materials. All standard ROLEC products exclusively use products complying with Directive 2011 / 65 / EU “Reduction of hazardous substances”.
It stipulates that, since 1 July 2006, only electronic equipment may be brought to the market in certain product categories that are free of certain hazardous materials. This particularly applies to lead, quicksilver, chrome-6, polyprominated biphyenyle (PBB) and polybrominated diphenyl ethers (PBDE). Rolec’s product palette has been RoHS-compliant since 1 May 2005.
Tailored to the special requirements in certain sectors and our customers’ core competences, we deliver custom-made solutions that can deviate from our standard products. This guarantees that everyone who places an order will receive the highest level of safety and complete transparency in the composition of high quality ROLEC enclosures.
Article 3g of Regulation (EU) 2023/1214 of June 23, 2023 amending Regulation (EU) No 833/2014 – Import ban on iron and steel products of Russian origin
Dear Ladies and Gentlemen,
We are currently receiving an increasing number of inquiries requesting a statement regarding our handling of the sanctions package adopted against Russia.
According to information from our suppliers, we can hereby confirm that the requirements of Article 3g of Regulation (EU) 2023/1214 of 23 June 2023 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia’s actions destabilizing the situation in Ukraine are being complied with.
Definition of the 1st IP code
0 = Not protected
Scope of protection: – – – – –
1 = Large foreign bodies
Scope of protection: Protection against accidental large surface contact with live and internal moving parts, e.g. by the hand, although no protection against intentional access to these parts. Protection against the penetration of solid foreign bodies with a diameter greater than 50 mm.
2 = Medium-sized foreign bodies
Scope of protection: Protection against contact between the fingers and live or internal moving parts. Protection against the penetration of solid foreign bodies with a diameter greater than 12 mm.
3 = Small foreign bodies
Scope of protection: Protection against contact between live or internal moving parts and tools, wire, etc. with a thickness of more than 2.5 mm. Protection against the penetration of solid foreign bodies with a diameter greater than 2.5 mm.
4 = Granular foreign bodies
Scope of protection: Protection against contact with live or internal moving parts with tools, wires etc. with a thickness of more than 1 mm.
5 = Dust deposits
Scope of protection: Complete protection against contact with live parts or parts moving internally. Protection against harmful dust deposits. The ingress of dust is not fully prevented but dust shall not penetrate in such quantities as to affect the functionality.
6 = Dust ingress
Scope of protection: Complete protection against contact with live parts or parts moving internally. Protection against the ingress of dust.
Definition of the 2nd IP code
0 = NOT PROTECTED
Scope of protection: – – – – –
1 = PROTECTED AGAINST DROPS
Scope of protection: Vertically falling drops must not have any harmful effects.
2 = PROTECTED AGAINST DROPS IF THE HOUSING IS INCLINED UP TO 15 °
Scope of protection: Drops falling vertically must not have any harmful effects if the housing is inclined at an angle of up to 15 ° on both sides of the vertical.
3 = PROTECTED AGAINST SPRAY WATER
Scope of protection: Water that is sprayed at an angle of up to 60 ° on both sides of the vertical must not have any harmful effects.
4 = PROTECTED AGAINST SPLASHING WATER
Scope of protection: Water that splashes against the housing from any direction must not have any harmful effects.
5 = PROTECTED AGAINST JETS
Scope of protection: Water that is directed as a jet against the housing from any direction must not have any harmful effects.
6 = PROTECTED AGAINST STRONG JETS OF WATER
Scope of protection: Water that is directed as a strong jet against the housing from any direction must not have any harmful effects.
7 = PROTECTED AGAINST THE EFFECTS OF INTERMEDIATE SUBMERGING IN WATER
Scope of protection: Water must not enter in an amount that causes harmful effects if the housing is temporarily submerged in water under standardized pressure and time conditions.
8 = PROTECTED AGAINST THE EFFECTS OF CONTINUOUS SUBMERGING IN WATER
Scope of protection: Water must not enter in an amount that causes harmful effects if the housing is continuously submerged under water under conditions that have to be agreed between the manufacturer and the user. However, the conditions must be more difficult than for code number 7.
9K = WATER FOR HIGH PRESSURE / STEAM JET CLEANING
Scope of protection: Water that is directed against the housing from every direction under greatly increased pressure must not have any harmful effects.
IK degrees of protection – degree of impact resistance
The IK degree of protection is a measure of the resistance of enclosures for electrical equipment to mechanical stress, especially when subjected to shock loads. The IK code is internationally standardized according to IEC 62262 (corresponds to EN 62262, previously EN 50102). There are ten degrees of protection, according to the impact energy that the enclosure can withstand.
00 = NO PROTECTION
Test: – – – – –
01-05 = BLOW <1 JOULE
Test: Strike from close range
06 = STRIKE 1 JOULE
Test: 500g from 20 cm
07 = BLOW 2 JOULE
Test: 500g from 40 cm
08 = BLOW 5 JOULE
Test: 1.7 kg from 29.5 cm
09 = BLOW 10 JOULE
Test: 5 kg from 20 cm
10 = BLOW 20 JOULE
Test: 5 kg from 40 cm
Approval sign
As an international company in the enclosure industry and as a global partner to the electronic markets, we offer to our customers globally recognized approbal standarts. Please find below more information about the individual approvals.
UL
Underwriters Laboratories (UL for short) was founded in 1894 and is an independent organization that examines and certifies products with regard to their safety. UL tests products, components, materials and systems to determine whether they meet specific requirements. If this is the case, these products may bear the UL mark, which is subject to a charge, as long as they comply with the specified standards. UL has developed more than 1,300 safety standards, a typical standard for electrical goods not only covers the requirements for electrical safety, but also a broad spectrum with regard to flammability and mechanical hazards. For the certification of its product by UL, a manufacturer must prove that he complies with the specified safety requirements, most of which were developed by UL itself. At the same time, a manufacturer must use an appropriate system to ensure that every copy of his product also meets the specified security requirements.
You will receive the following ROLEC products with this approval: aluDISC, aluCASE, aluNORM, aluPLUS, commandCASE, inoCASE A4, inoBOX A2, inoBOX A4, polyDOOR, polyTOP, profiPANEL
CSA GROUP
The CSA is an independent standards organization from Canada and has existed since 1919. The knowledge and experience of the CSA Group includes the development of standards, training and consulting services as well as global product testing and certification in all major business areas. CSA develops and maintains more than 3000 standards and regulations related to safety, design or performance. The CSA Group checks conformity with standards and guidelines as well as EMC tests, radio approvals for over 140 countries and environmental simulations.
You will receive the following ROLEC products with this approval: aluDISC, aluCASE, aluNORM, conFORM, inoBOX A2, inoBOX A4, polyTOP, polyDOOR
DNV-GL
DNV-GL (formerly Germanischer Lloyd) operates internationally as a classification society with a focus on shipping, oil and gas and renewable energies. Among other things, they offer type approvals, verifications, performance testing services, certification of all materials, components and systems that are relevant for the safe operation and quality of a ship.
You will receive the following ROLEC products with this approval: aluCASE, conFORM
conFORM – The EMC standard enclosure
Regulations
We take legal regulations and the preservation of our environment very seriously.
As you can already read under the heading of sustainability, the protection of our environment and the sustainable use of resources are very important to us. For this reason, we of course pay strict attention to compliance with statutory regulations. Find out more about our statement on conflict minerals, REACH and ROHS at ROLEC.
STATEMENT IN REGARDS TO CONFLICT MINERALS
On July 21, 2010, US President Barack Obama signed the Dodd-Frank Act, which in addition to the regulation of financial markets also obligated companies to not use raw materials from conflict regions (§ 1502).
This includes the publication and reporting obligations for “conflict minerals”: Companies listed in the US stock exchanges must publish the usage of certain raw materials that come from the Democratic Republic of Congo or other neighboring states (Angola, Burundi, Republic of Congo, Rwanda, Zambia, Sudan, Tanzania, Uganda, Central-African Republic).
Conflict materials in regards to this law include tin, tantalum, tungsten and gold.
We are aware that the mining of these “conflict minerals” in different countries, particularly in Central Africa, may lead to profits that are used to finance armed conflicts that may result in unacceptable human rights violations.
We have informed our suppliers that we cannot accept products and raw materials that contain gold, tantalum, tin or tungsten from conflict regions. Our suppliers were asked to inform us immediately if they use such “conflict minerals” in their products. All previous confirmations in our supply chain have not shown any deviations from the order. Thus, we assume that ROLEC products do not contain the named minerals from the aforementioned region.
Furthermore, the compliance with this order is a component of our delivery conditions and we have asked our suppliers to guarantee that no “conflict minerals” are used in their supply chain.
REACH
Registration – Evaluation – Authorisation of Chemicals (REACH)
Safe implementation of materials throughout the entire value creation chain
The concept of sustainability is anchored in our company’s philosophy: ROLEC thinks, acts and feels with strategy, passion and environmental awareness! We, too, follow the obligation:
In general, chemicals should be produced and used such that negative effects on humans and the environment remain reduced to an absolute minimum.
The European Union implemented this in legislation effective 1 June 2007 with the “REACH” Regulation. It is based on the principal of self-responsibility in all companies who import, manufacture and process chemicals. They are responsible for guaranteeing that their materials and processes are handled in a safe manner. They are obligated to have the materials implemented registered, to collect the requisite data and to pass them along throughout the value creation chain.
Suppliers of articles will fundamentally only have a disclosure obligation if more than 0.1% (w/w) of articles* exported from outside the EU consists of substances on the candidate list published by the ECHA (European Chemicals Agency, Helsinki)(Art. 33).
(*The term articles in this context means articles whose form, surface and design determines function to a greater degree than does the chemical composition.)
REACH and relevance for ROLEC
ROLEC Gehäuse-Systeme GmbH is a “downstream user” and “supplier of articles” under the REACh- Regulation; therefore, there is no registration obligation. Our products do not release any substances. Thus, Art. 7 (1) of the Regulation is not subject to application for us. However, we certainly do meet our disclosure obligations as a “supplier of articles” (Art. 33 REACH Regulation).
The materials and processes (lacquer, powder coatings, adhesives, coolants and lubricants we produce) are exclusively procured in the EU. Customers procuring these materials and looking to use them for applications such as repairs or their own production will receive the respective safety data sheets from our suppliers in compliance with REACH.
We do, of course, have all products procured outside the EU (components and components groups) tested for the potential presence of substances on the candidate list. Should they be present in a critical volume (> 0.1% (w/w)), we notify all parties involved immediately.
Upstream suppliers and REACH
The REACH Regulation means: “No data – no market!”
For Rolec, this means: Our suppliers must be aware that we can only purchase products from them when they have their products tested in line with REACH and can supply the requisite data.
Of course, we also expect our suppliers working outside the EU’s borders – be they importers or manufacturers – to have acted on time to meet these requirements.
All suppliers domiciled outside the EU have been required to have the material compositions and preparations affecting our products tested for substances in the candidate list and to replace them as necessary. The latter has not been necessary thus far; none of our products has required modification of its composition due to REACH. REACH represents a “living system” and is constantly being expanded. We, too, continue to ensure the harmlessness of the materials we use. Thus, REACH is an integral part to all of our processes.
ROHS
Directive 2011 / 65 / EU “Reduction of hazardous substances” (RoHS)
Safety and transparency with the selected material
ROLEC Gehäuse-Systeme GmbH follows all of the standard rules and legal requirements in selecting materials. All standard ROLEC products exclusively use products complying with Directive 2011 / 65 / EU “Reduction of hazardous substances”.
It stipulates that, since 1 July 2006, only electronic equipment may be brought to the market in certain product categories that are free of certain hazardous materials. This particularly applies to lead, quicksilver, chrome-6, polyprominated biphyenyle (PBB) and polybrominated diphenyl ethers (PBDE). Rolec’s product palette has been RoHS-compliant since 1 May 2005.
Tailored to the special requirements in certain sectors and our customers’ core competences, we deliver custom-made solutions that can deviate from our standard products. This guarantees that everyone who places an order will receive the highest level of safety and complete transparency in the composition of high quality ROLEC enclosures.
Article 3g of Regulation (EU) 2023/1214 of June 23, 2023 amending Regulation (EU) No 833/2014 – Import ban on iron and steel products of Russian origin
Dear Ladies and Gentlemen,
We are currently receiving an increasing number of inquiries requesting a statement regarding our handling of the sanctions package adopted against Russia.
According to information from our suppliers, we can hereby confirm that the requirements of Article 3g of Regulation (EU) 2023/1214 of 23 June 2023 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of Russia’s actions destabilizing the situation in Ukraine are being complied with.
Definition of the 1st IP code
0 = Not protected
Scope of protection: – – – – –
1 = Large foreign bodies
Scope of protection: Protection against accidental large surface contact with live and internal moving parts, e.g. by the hand, although no protection against intentional access to these parts. Protection against the penetration of solid foreign bodies with a diameter greater than 50 mm.
2 = Medium-sized foreign bodies
Scope of protection: Protection against contact between the fingers and live or internal moving parts. Protection against the penetration of solid foreign bodies with a diameter greater than 12 mm.
3 = Small foreign bodies
Scope of protection: Protection against contact between live or internal moving parts and tools, wire, etc. with a thickness of more than 2.5 mm. Protection against the penetration of solid foreign bodies with a diameter greater than 2.5 mm.
4 = Granular foreign bodies
Scope of protection: Protection against contact with live or internal moving parts with tools, wires etc. with a thickness of more than 1 mm.
5 = Dust deposits
Scope of protection: Complete protection against contact with live parts or parts moving internally. Protection against harmful dust deposits. The ingress of dust is not fully prevented but dust shall not penetrate in such quantities as to affect the functionality.
6 = Dust ingress
Scope of protection: Complete protection against contact with live parts or parts moving internally. Protection against the ingress of dust.
Definition of the 2nd IP code
0 = NOT PROTECTED
Scope of protection: – – – – –
1 = PROTECTED AGAINST DROPS
Scope of protection: Vertically falling drops must not have any harmful effects.
2 = PROTECTED AGAINST DROPS IF THE HOUSING IS INCLINED UP TO 15 °
Scope of protection: Drops falling vertically must not have any harmful effects if the housing is inclined at an angle of up to 15 ° on both sides of the vertical.
3 = PROTECTED AGAINST SPRAY WATER
Scope of protection: Water that is sprayed at an angle of up to 60 ° on both sides of the vertical must not have any harmful effects.
4 = PROTECTED AGAINST SPLASHING WATER
Scope of protection: Water that splashes against the housing from any direction must not have any harmful effects.
5 = PROTECTED AGAINST JETS
Scope of protection: Water that is directed as a jet against the housing from any direction must not have any harmful effects.
6 = PROTECTED AGAINST STRONG JETS OF WATER
Scope of protection: Water that is directed as a strong jet against the housing from any direction must not have any harmful effects.
7 = PROTECTED AGAINST THE EFFECTS OF INTERMEDIATE SUBMERGING IN WATER
Scope of protection: Water must not enter in an amount that causes harmful effects if the housing is temporarily submerged in water under standardized pressure and time conditions.
8 = PROTECTED AGAINST THE EFFECTS OF CONTINUOUS SUBMERGING IN WATER
Scope of protection: Water must not enter in an amount that causes harmful effects if the housing is continuously submerged under water under conditions that have to be agreed between the manufacturer and the user. However, the conditions must be more difficult than for code number 7.
9K = WATER FOR HIGH PRESSURE / STEAM JET CLEANING
Scope of protection: Water that is directed against the housing from every direction under greatly increased pressure must not have any harmful effects.
IK degrees of protection – degree of impact resistance
The IK degree of protection is a measure of the resistance of enclosures for electrical equipment to mechanical stress, especially when subjected to shock loads. The IK code is internationally standardized according to IEC 62262 (corresponds to EN 62262, previously EN 50102). There are ten degrees of protection, according to the impact energy that the enclosure can withstand.
00 = NO PROTECTION
Test: – – – – –
01-05 = BLOW <1 JOULE
Test: Strike from close range
06 = STRIKE 1 JOULE
Test: 500g from 20 cm
07 = BLOW 2 JOULE
Test: 500g from 40 cm
08 = BLOW 5 JOULE
Test: 1.7 kg from 29.5 cm
09 = BLOW 10 JOULE
Test: 5 kg from 20 cm
10 = BLOW 20 JOULE
Test: 5 kg from 40 cm
Approval sign
As an international company in the enclosure industry and as a global partner to the electronic markets, we offer to our customers globally recognized approbal standarts. Please find below more information about the individual approvals.
Underwriters Laboratories (UL for short) was founded in 1894 and is an independent organization that examines and certifies products with regard to their safety. UL tests products, components, materials and systems to determine whether they meet specific requirements. If this is the case, these products may bear the UL mark, which is subject to a charge, as long as they comply with the specified standards. UL has developed more than 1,300 safety standards, a typical standard for electrical goods not only covers the requirements for electrical safety, but also a broad spectrum with regard to flammability and mechanical hazards. For the certification of its product by UL, a manufacturer must prove that he complies with the specified safety requirements, most of which were developed by UL itself. At the same time, a manufacturer must use an appropriate system to ensure that every copy of his product also meets the specified security requirements.
You will receive the following ROLEC products with this approval: aluDISC, aluCASE, aluNORM, aluPLUS, commandCASE, inoCASE A4, inoBOX A2, inoBOX A4, polyDOOR, polyTOP, profiPANEL
CSA GROUP
The CSA is an independent standards organization from Canada and has existed since 1919. The knowledge and experience of the CSA Group includes the development of standards, training and consulting services as well as global product testing and certification in all major business areas. CSA develops and maintains more than 3000 standards and regulations related to safety, design or performance. The CSA Group checks conformity with standards and guidelines as well as EMC tests, radio approvals for over 140 countries and environmental simulations.
You will receive the following ROLEC products with this approval: aluDISC, aluCASE, aluNORM
aluNORM – The multivariable enclosure
DNV-GL
DNV-GL (formerly Germanischer Lloyd) operates internationally as a classification society with a focus on shipping, oil and gas and renewable energies. Among other things, they offer type approvals, verifications, performance testing services, certification of all materials, components and systems that are relevant for the safe operation and quality of a ship.
You will receive the following ROLEC products with this approval: aluCASE, conFORM, polyKOM, polyTOP